Beschreibung
– 26 voices, 4 part multitimbral
– 3 part effects section (FX, delay and reverb) for each part
– 49-key octave velocity sensitive keyboard with octave shift buttons, +/-2 octaves
– Keyboard Split with 2 slots for the upper and lower sections
– Modulation Wheel
– Pitch Stick with no dead zone at zero crossing
– Programmable Pitch bend range, up to +/- 4 octaves
– Separate up/down bend range: -12 or -24 semitones, + 2 semitones
– 1 pedal input for sustain
– 1 pedal input for expression pedal
– 3 LED displays, 23 knobs, 3 encoders and 20+ buttons for program and performance editing
– Oscillator models of multiple waveforms (traditional analog, extended analog, pulse waveforms, real-time algorithmical waveforms with additive-, FM- and formant- synthesis)
– OSC config knob 11 categories (Pitch, Shape, Osc Sync, Noise Mix, Osc 2 Detune, Sine Mix, Tri Mix, Saw Mix, Square Mix, Freq Modulation, Amp Modulation)
– Multi-mode filter with 12 dB (2-pole) low pass, 24 dB (4-pole) lowpass and band pass, high pass, Ladder M and Ladder TB characteristics
– Cut off, Resonance, envelope amount, envelope amount controlled by velocity
– ADR/ASR envelope
– Filter keyboard tracking can be set to off, 1/3, 2/3 or full
– Adjustable Filter Distortion
– LFO generates a triangle, square, sawtooth, inverted sawtooth or sample and hold waveforms. LFO can be routed to Filter Frequency and Osc mod. The LFO rate can be synchronized to the Master Clock
– LFO can be switched to polyphonic Env mode with four different characteristics and sample and hold is manually triggered by keyboard (polyphonic S/H)
– Arpeggiator: Range: 1 – 4 octave. Modes: up, down, up/down and random. The Arpeggio rate can be synchronized to the Master Clock
– ADR/ASR envelope, velocity control on/off, inverse envelope on/off
– ADR/ASR envelope, velocity control on/off, gain control
– Individual Pan-control per program
– Voice modes: Poly, Legato with portamento, Mono, True Unison 1, 2 und 3
– Four program slots for layering possibilities and multitimbrality
– FX section with Flanger, Phaser, Ring Modulation, Chorus, Ensemble and Drive
– Delay section with tap tempo, four stages of feedback, stereo ping-pong, dry/wet mix. The Delay speed can be synchronized to the Master Clock
– Reverb section with five algorithms (Room, Stage 1, Stage 2, Hall 1, Hall 2)
– Programs (single sounds): 8 x 50 (400) locations
– Performances (multi sounds): 4 x 50 (200) locations
– 4 outputs. Each slot can be assigned to its own output
– Headphones output
– High resolution low noise 24 bit DACs
– All control knobs and switches send and receive control change messages
– System exclusive bulk dumps. One program or all programs
– Master Clock will sync to incoming MIDI clock
– Soft Thru
– 4 Line Level Audio Outputs – ¼’, 6,35 mm jacks, unbalanced
– Stereo Headphone Output – ¼’, 6,35 mm stereo jack
– Sustain Pedal – ¼’, 6,35 mm jack. Use a momentary pedal, like e.g., Roland DP-2, DP-6, Yamaha FC-4, FC-5, Fatar VFP1-25 etc.
– Control Pedal – ¼’, 6,35 mm TRS stereo jack. Use a Yamaha FC-7, Roland EV-7, Roland EV-5, Korg EXP2 or Korg XVP10
– USB connector with MIDI capabilities
– MIDI In und Out – 5 pin DIN connectors
– Inklusive: User Manual, Power Cord with IEC C14 connector
– Abmessungen: : 864 x 94 x 272 mm
– Gewicht: 4,85 kg